China High Quality 81303059229 Suppliers

The drum test brake is to install the friction pad of the Henan truck accessory manufacturer on the surface of the two arc brake shoes, take one end of the brake shoe as the support point, and increase the driving force from the other end to make the brake shoe press towards the inner side of the brake drum and brake. In the hydraulic mechanism pump, the piston rod of the Henan truck accessory manufacturer of the brake master cylinder immediately promotes the brake shoe; In the event of air impact braking, narrow air will promote the rotation of a camshaft to make the brake shoe extend outward. When the brake working pressure subsides, the return torsion spring pulls the brake shoe away from the brake drum, thus eliminating the brake.

For air springs sealed with a hoop ring, the general inflation pressure should not be less than 0.07 MPa; for those utilizing flange clamping or self-sealing under pressure, the inflation pressure must be no less than 0.1 MPa. Typically, the design pressure of an air spring is one-third of its burst pressure; in optimal working environments, this design pressure can reach up to half of its burst capacity.

Speaking of arocs, in the global truck application field, everyone knows why Mercedes Benz trucks can stand out in the entire industry. Below, SYHOWER, a supplier of heavy truck parts for Mercedes Benz, will provide you with a detailed introduction to the advantages of Mercedes Arocs trucks?

As a major auto consumer, China's auto industry has been the largest in the world for 9 consecutive years, and the auto parts market has been expanding. The release of relevant policies on auto parts will also help to standardize the remanufacturing behavior and market order of auto parts, guarantee the quality of remanufactured products, accelerate the standardized and large-scale development of the remanufacturing industry, and bring broad prospects for the auto parts remanufacturing industry.

​There is already a lot of knowledge about automotive components, so I am a bit familiar with the secret of prolonging the service life of automotive components. Everyone can also pay attention to it, which can help maintain the safety and stability of the car.

Firstly, the adjustment and condition of the suspension system directly impact tire-ground contact. Inadequate stiffness or wear in suspension components such as springs and shock absorbers can lead to increased rolling resistance, necessitating more energy for propulsion and resulting in higher fuel consumption.