FAQ

1, rack and pinion steering gear: it is one of the most common steering gear. Its basic structure is a pair of meshing pinion and rack. When the steering shaft drives the pinion to rotate, the rack moves in a straight line.

The structure of the stabilizer bar is a torsion bar spring made of spring steel, in the shape of a "U" shape, which is placed across the front and rear suspension of the car. The middle part of the rod body is hinged with the body or frame with a rubber bushing, and the two ends are connected with ......

The axle is a key part of the car, which connects the front and rear parts of the vehicle. The main role of the axle is to transfer the weight and power of the vehicle to the wheels, so that the vehicle can run normally. The axle usually consists of two half axles and a axle housing, which supports ......

According to the different cooling media, automotive condensers can be divided into four categories, and their functions are as follows:

The condenser is mostly placed in front of the car water tank, but the air conditioning system can transfer the heat from the tube to the air near the tube in a very fast way. In the distillation process, the device that changes the gas or vapor into a liquid state is called the condenser, but all c......

The working principle of the rocker arm is: when the engine is running, the camshaft rotates with the CAM, and the camshaft presses the rocker arm. In this process, the rocker arm is partially rotated around the pin shaft, usually using the shaft as the other end to generate a pivot force. One end o......