FAQ

A bearing bush is a part used to protect the shaft, usually made of metal or plastic. It can be installed directly on the shaft to reduce friction and wear between the shaft and the bearing and extend the service life of the shaft and bearing. Bearing bushing usually comes in different shapes and si......

Differential is a key component in the car drive system, which is responsible for distributing the power of the engine to the left and right drive wheels. The composition of the differential mainly includes the following parts:

If the gasket is flushed, the sealing performance of the gasket will be poor, affecting the cylinder pressure of the engine, and may also cause the engine to leak oil.

1, rack and pinion steering gear: it is one of the most common steering gear. Its basic structure is a pair of meshing pinion and rack. When the steering shaft drives the pinion to rotate, the rack moves in a straight line.

The structure of the stabilizer bar is a torsion bar spring made of spring steel, in the shape of a "U" shape, which is placed across the front and rear suspension of the car. The middle part of the rod body is hinged with the body or frame with a rubber bushing, and the two ends are connected with ......

The axle is a key part of the car, which connects the front and rear parts of the vehicle. The main role of the axle is to transfer the weight and power of the vehicle to the wheels, so that the vehicle can run normally. The axle usually consists of two half axles and a axle housing, which supports ......