FAQ

The structure of the gearbox mainly includes the following parts: 1. Input shaft: transmits the power of the engine to the gearbox. 2. Output shaft: transfer the power inside the gearbox to the drive wheel or transfer case. 3. Shift fork: control the action of shift pad or clutch to realize the swit......

The dryer is to dry the compressed air, the water molecules and oil molecules in the air through the dryer, the dryer will be adsorbed and filtered to collect the water molecules in the compressed air and a small amount of oil molecules, to a certain amount will be discharged with the pressure relie......

1, The filter element is the core component of the filter, made of special materials, belongs to the wearing parts, need special maintenance, maintenance;

ts main components are: outer cylinder, piston, piston rod, brake valve, sealing device and so on. When the aircraft strikes the ground, the impact load causes the piston rod to slide upward, and the oil in the shock absorber is forced to open the valve and pass through several holes at high speed. ......

Disc brake is mainly composed of brake caliper, brake disc, piston and brake block. Brake disc is the core component of disc brake, usually made of metal materials, working with the brake block friction to produce braking force. The structure of the brake disc is varied, including flat type, punched......

At present, the most common clutch on the car is the friction clutch, which is mainly composed of the active part, the driven part, the pressing mechanism and the control structure. The active part includes flywheel, clutch cover and pressure plate, etc. The driven part includes the driven wheel hub......